Step 1: Inspect the installed IOS
a. Referring to Topology 1, connect the console (or rollover) cable to the console port on the router and
the other cable end to the host computer with a DB-9 or DB-25 adapter to the COM 1 port. Ensure
that power has been applied to both the host computer and router.
b. Establish a HyperTerminal or other terminal emulation program connection to the router.
c. From the privileged EXEC mode prompt of the terminal, issue the show version command. Record
the following details:
Results will vary; examples shown.
Name of the system image (IOS) file ___________________________ 1841-ipbase-mz.124-1c.bin
IOS Feature Set ___________________________ IP BASE
Date of code build __________________________ Compiled Tue 25-Oct-05
Where the router IOS image booted from ____________________________________ ROM: System
Bootstrap, Version 12.4(13r)T
Type of processor board ________________________________ Processor board ID FTX1118X09K
Amount of DRAM __________________________ 128 MB
Number of Ethernet interfaces _____________________ 2
Number of serial interfaces _______________________ 2
Amount of NVRAM _____________________________ 191K bytes of NVRAM
Amount of flash memory ________________________ 31360K bytes of ATA CompactFlash
Configuration register ___________________________ 0x2102
d. Issue the show flash command. Record the following details:
The amount of flash memory available and used _______________________________________
126976 bytes available (31805440 bytes used)
The size of the IOS file _____________________________ 13937472 bytes
e. Issue the show running-configuration command. Record features that indicate what the router
is capable of.
ip subnet-zero, ip cef, ip classless
Step 2: Examine the IOS feature set on Cisco.com (1)
a. Go to the website http://www.cisco.com.
b. Remember that the Cisco main website changes frequently. The steps listed here representative of
the procedure for accessing the resources. If the options do not appear as listed, please check with
your instructor or use the cisco.com search functions to find the IOS Software Selector.
c. Roll over the Support tab and select Support.
d. On the Support page, under Frequently Used Resources, click Tools & Resources.
e. At the bottom of the Tools & Resources page, click the Show All Tools button to display tools by
category.
f. Scroll to the Software section.
g. Click Cisco IOS Software Selector.
h. Click Search by Release/Product Code/Platform.
1)
2)
3)
At Platform select: 1841. Click Continue.
At Release select: 12.4(3c)
At Feature Set select: IP BASE
Print or select and save the search results.
NOTE: The list of features may be more than 10 printed pages.
i. Examine the listed features. From your understanding of IOS features, group three or four features
under headings such as:
Answers vary; examples include:
Routing: ____________________________________________________ EIRGP, OSPF, RIP
Security: ____________________________________________________ VPN, L2TP, RADIUS
IP Services: _________________________________________________ DHCP, NAT
Converged Services: __________________________________________ LLQ, QoS, WFQ
Network Management:
___________________________________________________________ SNMP, SSH, CDP
Other: ________________ WAN
___________________________________________________________ Frame Relay, ISDN, PPP
Step 3: Examine the IOS feature set on Cisco.com (2)
a. If your IOS version is different than the IOS version in Step 2, repeat this search using your IOS
version. Record your results.
b. Compare this list of features with the list from Step 2.
Step 4: Clean up
Erase any configurations and reload the router. Disconnect and store the cabling. For PC hosts that are
normally connected to other networks (such as the school LAN or to the Internet), reconnect the appropriate cabling and restore the TCP/IP settings.
Task 2: Determine the Capabilities of the IOS of a Cisco 2960 Switch
Step 1: Inspect the installed IOS
a. Referring to Topology 2, connect the console cable to the console port on the switch and the other
cable end to the host computer with a DB-9 or DB-25 adapter to the COM 1 port. Ensure that power
has been applied to both the host computer and switch.
b. Establish a HyperTerminal or other terminal emulation program to the switch.
c. From the privileged EXEC mode prompt of the terminal, issue the show version command. Record
the following details:
Results will vary; examples shown.
IOS version ______________________________ Version 12.2(25)SEE3
Name of the system image (IOS) file ___________________________ c2960-lanbase-mz.122-
25.SEE3
IOS Feature Set ___________________________ LAN BASE
Date of code build __________________________ Compiled Thu 26-Dec-10
Type of processor board and processor _____________________________________________
Processor board ID FOC1122Z4BJ, PowerPC405 processor
Amount of DRAM _________________________ 64 MB
Number of Fast Ethernet interfaces ________________ 24
Number of Gigabit Ethernet interfaces ______________ 2
Amount of NVRAM _____________________________ 64K bytes of NVRAM
Amount of flash memory ________________________ 32514048 bytes total
Configuration register ___________________________ 0xF
d. Issue the show flash command. Record the following details:
The amount of flash memory available and used _______________________________________
32514048 bytes total (24804864 bytes free)
The size of the IOS file _____________________________ 7709184 bytes
Step 2: Examine the IOS feature set on Cisco.com (1)
a. Go to the website http://www.cisco.com.
b. Roll over the tab and select Support.
c. On the Support page, under Frequently Used Resources, click Tools & Resources.
d. At the bottom of the Tools & Resources page, click the Show All Tools button to display tools by
category.
e. Scroll to the Software section.
f. Click Cisco IOS Software Selector - Cisco Feature Navigator.
g. Click Search by Platform.
1) At Platform select: CAT2960. Click Continue.
2) At Major Release select: 12.2SEE (The screen will refresh after each selection)
3) At Release select: 12.2(25)SEE3
4) At Feature Set select: LAN BASE
Print or select and save the search results.
h. Examine the listed features. From your understanding of IOS features group 1 or 2 features under
headings such as:
Answers vary; examples include:
Routing: ____________________________________________________ None (Layer 2 switch)
Security: ____________________________________________________ RADIUS, ACL
IP Services: _________________________________________________ DHCP
Converged Services: __________________________________________ AutoQoS
Network Management: _________________________________________ SNMP, SSH, CDP
Other: ______________________________________________________ IEEE 802.1Q, STP
Step 3: Examine the IOS feature set on Cisco.com (2)
a. If your IOS version is different than the IOS version in Step 2, repeat this search using your IOS
version. Record your results.
b. Compare this list of features with the list from Step 2.
Step 4: Clean up
Erase any configurations and reload the switch. Disconnect and store the cabling. For PC hosts that are
normally connected to other networks (such as the school LAN or to the Internet), reconnect the appropriate cabling and restore the TCP/IP settings.
Tidak ada komentar:
Posting Komentar